Tải Driver USB H-Mobile IT5635: Khắc phục lỗi kết nối điện thoại với máy tính

Tải Driver USB H-Mobile IT5635: Khắc phục lỗi kết nối điện thoại với máy tính

Điện thoại H-Mobile IT5635 của bạn không hiển thị trên PC? Hoặc không thể kết nối với máy tính? Nguyên nhân có thể là do thiếu hoặc driver USB H-Mobile IT5635 bị lỗi. Để khắc phục, hãy tải xuống và cài đặt driver USB H-Mobile IT5635 trên máy tính của bạn.

Driver USB H-Mobile là cần thiết để kết nối H-Mobile IT5635 với máy tính. Việc tải xuống và cài đặt driver đúng cách sẽ cho phép máy tính nhận diện điện thoại của bạn, cho phép bạn sao chép dữ liệu, sạc pin, và sử dụng các chức năng khác cần thiết. Nếu bạn đang gặp sự cố kết nối, hãy đảm bảo đã tải xuống và cài đặt phiên bản driver phù hợp với hệ điều hành của mình.

Hướng dẫn tải xuống và cài đặt (thêm hướng dẫn cụ thể tại đây nếu có):

• [Bước 1: Tìm đường dẫn tải xuống driver chính thức (nếu có)]
• [Bước 2: Tải xuống file driver]
• [Bước 3: Giải nén file driver]
• [Bước 4: Cài đặt driver]
• [Bước 5: Khởi động lại máy tính]

Lưu ý: Hãy đảm bảo tải driver từ nguồn đáng tin cậy để tránh các rủi ro về bảo mật. Nếu bạn không chắc chắn về việc cài đặt, hãy tìm kiếm sự hỗ trợ từ chuyên gia hoặc tham khảo hướng dẫn chi tiết từ nhà sản xuất.

#HMobileIT5635 #DriverUSB #TaiDriver #KetNoiDienThoai #KhacPhucLoi #HuongDan #Troubleshooting #Support

H-Mobile IT5635 USB Drivers (DOWNLOAD)

H-Mobile IT5635 phone not showing up on the PC? Or H-Mobile IT5635 phone won’t connect to a computer? It might be because of the missing H-Mobile IT5635 USB drivers or corrupted drivers. To fix the problem, download the H-Mobile IT5635 USB driver and install it on your computer.

H-Mobile USB drivers are required to connect H-Mobile IT5635 to a Computer or Laptop via USB cable. If you’re looking for a H-Mobile IT5635 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for H-Mobile IT5635 along with the ADB interface drivers and Fastboot drivers on this page.

With H-Mobile IT5635 Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.

H-Mobile IT5635 ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.

Download H-Mobile IT5635 USB Driver

The H-Mobile mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

H-Mobile IT5635 CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

H-Mobile IT5635 VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

H-Mobile IT5635 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The H-Mobile IT5635 Fastboot and ADB drivers can be downloaded below.

H-Mobile IT5635 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: H-Mobile S13 USB Drivers

How to Install H-Mobile IT5635 CDC Drivers

1. Download and extract the latest Google Android CDC Driver (android-cdc-driver.zip) on your computer.
2. Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Once the Device Manager window loads, click on your Computer name.
4. Now click on Action and then select Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now select Show All Devices and click on Next.
8. Now click on Have Disk… to launch the Install From Disk window.
9. Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select Android_Gadget_CDC_driver.inf driver file and click on Open and then on OK.
11. Select the Android Gadget VCOM Driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
15. Once all the listed drivers are installed, restart your computer.

How to Install H-Mobile IT5635 VCOM Drivers

1. Download and extract the android-vcom-driver.zip to Desktop on your computer.
2. Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
3. When the Device Manager window opens, click on your Computer name.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now click on Show All Devices from the list and click on Next.
8. Now click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.
11. Now select the MediaTek DA USB VCOM Port driver from the list and click on Next.
12. In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
15. Once all the listed drivers are installed, reboot your computer.

How to Install H-Mobile IT5635 USB Drivers Manually

1. Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
2. Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. In the next screen, click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf driver file and click on Open and then on OK.
11. Now select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install H-Mobile IT5635 Android USB Drivers

Subscribe to Android USB Drivers

How to Install H-Mobile IT5635 ADB and Fastboot Drivers

1. Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you’ll find the ADB driver installer setup file.
2. Right-click on the ADB installer setup file and select Run as administrator.
3. Now 15 seconds ADB driver installer command prompt window should open on your computer.
4. It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
5. Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
6. Now, the ADB and Fastboot driver installation process should begin.
7. When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
8. Now the “Device Driver Installation Wizard” window should pop-up.
9. Click on Next to begin installing Google USB Drivers (WinUSB).
10. Once the installation process is completed, click on Finish and restart your computer.

Video Tutorial: How to Install H-Mobile IT5635 ADB and Fastboot Drivers

Subscribe to Android USB Drivers

Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

Nguồn: https://manualmentor.com/h-mobile-it5635-usb-drivers-download.html?utm_source=rss&utm_medium=rss&utm_campaign=h-mobile-it5635-usb-drivers-download

H-Mobile IT5635 phone not showing up on the PC? Or H-Mobile IT5635 phone won’t connect to a computer? It might be because of the missing H-Mobile IT5635 USB drivers or corrupted drivers. To fix the problem, download the H-Mobile IT5635 USB driver and install it on your computer.

H-Mobile USB drivers are required to connect H-Mobile IT5635 to a Computer or Laptop via USB cable. If you’re looking for a H-Mobile IT5635 USB driver for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, then we have got you covered. We have shared the official USB Driver for H-Mobile IT5635 along with the ADB interface drivers and Fastboot drivers on this page.

With H-Mobile IT5635 Android USB Driver installed, we can connect the device to the computer as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files between the two devices.

H-Mobile IT5635 ADB Driver and Fastboot Driver enable you to pass ADB commands and Fastboot commands from the computer to perform certain operations on your phone.

Download H-Mobile IT5635 USB Driver

The H-Mobile mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.

H-Mobile IT5635 CDC Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

H-Mobile IT5635 VCOM Driver for Flashing Firmware

Download Now

How to install: Follow Tutorial

H-Mobile IT5635 USB Driver for normal connecting to PC

Download Now

How to install: Follow Tutorial

The H-Mobile IT5635 Fastboot and ADB drivers can be downloaded below.

H-Mobile IT5635 ADB and Fastboot Drivers

Download Now

How to install: Follow Tutorial

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: H-Mobile S13 USB Drivers

How to Install H-Mobile IT5635 CDC Drivers

1. Download and extract the latest Google Android CDC Driver (android-cdc-driver.zip) on your computer.
2. Launch Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Once the Device Manager window loads, click on your Computer name.
4. Now click on Action and then select Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now select Show All Devices and click on Next.
8. Now click on Have Disk… to launch the Install From Disk window.
9. Now click on Browse… from the Install From Disk window and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select Android_Gadget_CDC_driver.inf driver file and click on Open and then on OK.
11. Select the Android Gadget VCOM Driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
15. Once all the listed drivers are installed, restart your computer.

How to Install H-Mobile IT5635 VCOM Drivers

1. Download and extract the android-vcom-driver.zip to Desktop on your computer.
2. Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
3. When the Device Manager window opens, click on your Computer name.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Now click on Show All Devices from the list and click on Next.
8. Now click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.
11. Now select the MediaTek DA USB VCOM Port driver from the list and click on Next.
12. In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
15. Once all the listed drivers are installed, reboot your computer.

How to Install H-Mobile IT5635 USB Drivers Manually

1. Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.
2. Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
3. Now click on your Computer name in the Device Manager window.
4. Now click on Action and then click on Add legacy hardware.
5. Now Add Hardware Wizard window should open. Click on Next to continue.
6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.
7. Select Show All Devices from the list and click on Next.
8. In the next screen, click on Have Disk… to open the Install From Disk window.
9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
10. Now select android_winusb.inf driver file and click on Open and then on OK.
11. Now select the Android ADB Interface driver from the list and click on Next.
12. Confirm the Hardware driver to install and click on Next to begin the installation process.
13. Once installed, click on Finish.
14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
15. Once all the listed drivers are installed, reboot your computer.

Video Tutorial: How to Install H-Mobile IT5635 Android USB Drivers

Subscribe to Android USB Drivers

How to Install H-Mobile IT5635 ADB and Fastboot Drivers

1. Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you’ll find the ADB driver installer setup file.
2. Right-click on the ADB installer setup file and select Run as administrator.
3. Now 15 seconds ADB driver installer command prompt window should open on your computer.
4. It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.
5. Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.
6. Now, the ADB and Fastboot driver installation process should begin.
7. When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.
8. Now the “Device Driver Installation Wizard” window should pop-up.
9. Click on Next to begin installing Google USB Drivers (WinUSB).
10. Once the installation process is completed, click on Finish and restart your computer.

Video Tutorial: How to Install H-Mobile IT5635 ADB and Fastboot Drivers

Subscribe to Android USB Drivers

Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

[ad_2]