Hướng Dẫn Tải Và Cài Đặt Driver USB Evertek EverGlory Cho Máy Tính

Hướng Dẫn Tải Và Cài Đặt Driver USB Evertek EverGlory Cho Máy Tính

Bạn đang gặp khó khăn khi kết nối điện thoại Evertek EverGlory với máy tính? Có thể nguyên nhân nằm ở driver USB. Bài viết này sẽ hướng dẫn bạn cách tải và cài đặt driver USB Evertek EverGlory chính thức, an toàn và miễn phí trên các hệ điều hành Windows 11, Windows 10, Windows 7, 8, 8.1 và cả XP.

Tại Sao Bạn Cần Driver USB Evertek EverGlory?

Driver USB là cầu nối quan trọng giữa điện thoại và máy tính. Nếu không có driver phù hợp, máy tính sẽ không nhận diện được thiết bị Evertek EverGlory, khiến bạn không thể thực hiện các thao tác như truyền dữ liệu, sao lưu, hoặc cập nhật firmware.

Driver USB Evertek EverGlory Có Gì Đặc Biệt?

• Chính thức: Được cung cấp bởi Evertek, đảm bảo tính tương thích cao.
• An toàn: Đã được kiểm tra và xác nhận không chứa virus hoặc mã độc.
• Dễ cài đặt: Hướng dẫn chi tiết từng bước giúp bạn thực hiện nhanh chóng.

Hướng Dẫn Tải Và Cài Đặt

1. Tải Driver: Truy cập liên kết tải ở phần dưới và chọn phiên bản phù hợp với hệ điều hành của bạn.
2. Giải Nén File: Sau khi tải về, giải nén file ZIP để lấy file cài đặt.
3. Cài Đặt Driver:
   • Mở file cài đặt và làm theo hướng dẫn trên màn hình.
   • Khởi động lại máy tính sau khi cài đặt hoàn tất.
4. Kết Nối Điện Thoại: Sử dụng cáp USB để kết nối Evertek EverGlory với máy tính.

Link Tải Driver USB Evertek EverGlory

Bấm vào đây để tải: Link Tải Driver

Lưu Ý

• Đảm bảo điện thoại đã bật chế độ USB Debugging trước khi kết nối.
• Nếu gặp lỗi trong quá trình cài đặt, hãy thử chạy file cài đặt với quyền Administrator.

Với driver USB Evertek EverGlory chính thức, việc kết nối và quản lý dữ liệu trên điện thoại của bạn sẽ trở nên dễ dàng hơn bao giờ hết. Đừng quên chia sẻ bài viết này nếu bạn thấy hữu ích!

#EvertekEverGlory #USBDriver #HướngDẫnCàiĐặt #KếtNốiMáyTính #TảiDriverMiễnPhí
Evertek EverGlory USB Drivers (DOWNLOAD)

Having trouble connecting Evertek EverGlory to PC? It might be a driver problem, so download Evertek EverGlory Android USB Drivers and install them on Windows 11, Windows 10, Windows 7, 8, 8.1, or XP PC. The Evertek EverGlory USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for Evertek EverGlory from the downloads section and install it on Windows PC by following the instructions provided below.

With Evertek EverGlory USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.

We have also provided Evertek EverGlory ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.
Download Evertek EverGlory USB Driver
The Evertek mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
Evertek EverGlory CDC Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Evertek EverGlory VCOM Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Evertek EverGlory USB Driver for normal connecting to PC
Download Now
How to install: Follow Tutorial

The Evertek EverGlory Fastboot and ADB drivers can be downloaded below.
Evertek EverGlory ADB and Fastboot Drivers
Download Now
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Evertek EverGlory II USB Drivers
How to Install Evertek EverGlory CDC Drivers
Download the android-cdc-driver.zip file on your computer and extract it on Desktop.
Open the Device Manager on your computer by searching device manager from Windows Start Menu.
Now click on your Computer name in the Device Manager window.
Now click on Action and then select Add legacy hardware.
Add Hardware Wizard window should open, click on Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Select Show All Devices from the list and click on Next.
On the next screen, click on Have Disk… to open the Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select Android_Gadget_CDC_driver.inf file and click on Open and then on OK.
Select the Android Gadget VCOM Driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
Once all the listed drivers are installed, restart your computer.
How to Install Evertek EverGlory VCOM Drivers
Download and extract the android-vcom-driver.zip file on your computer.
Open Device Manager on your computer by right-clicking the Windows Start Button and selecting Device Manager.
Once the Device Manager loads, click on your Computer name.
Now click on Action and then on Add legacy hardware.
Now Add Hardware Wizard window should open. Click Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
In the next screen, select Show All Devices from the list and click on Next.
Now click on Have Disk… to launch Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the Android VCOM drivers in Step #1.
Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.
Select MediaTek DA USB VCOM Port driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
Once all the listed drivers are installed, reboot your computer.
How to Install Evertek EverGlory USB Drivers Manually
Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
When the Device Manager window opens, click on your Computer name.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now click on Show All Devices from the list and click on Next.
Now click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.
Now select the Android ADB Interface driver from the list and click on Next.
In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Evertek EverGlory Android USB Drivers

Subscribe to Android USB Drivers

How to Install Evertek EverGlory ADB and Fastboot Drivers
Download and extract the 15 seconds ADB installer zip package on your computer.
Now right click on the adb installer setup exe file and click on Run as administrator.
Now a command prompt window should open.
It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
Now, the ADB driver and Fastboot driver installation process should begin.
When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the “Device Driver Installation Wizard” window should open.
Click on Next to install the Google USB Drivers (WinUSB).
Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install Evertek EverGlory ADB and Fastboot Drivers

Subscribe to Android USB Drivers

Important Notes:
[] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

Nguồn: https://manualmentor.com/evertek-everglory-usb-drivers-download.html?utm_source=rss&utm_medium=rss&utm_campaign=evertek-everglory-usb-drivers-download

Having trouble connecting Evertek EverGlory to PC? It might be a driver problem, so download Evertek EverGlory Android USB Drivers and install them on Windows 11, Windows 10, Windows 7, 8, 8.1, or XP PC. The Evertek EverGlory USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for Evertek EverGlory from the downloads section and install it on Windows PC by following the instructions provided below.

With Evertek EverGlory USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.

We have also provided Evertek EverGlory ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.
Download Evertek EverGlory USB Driver
The Evertek mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
Evertek EverGlory CDC Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Evertek EverGlory VCOM Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Evertek EverGlory USB Driver for normal connecting to PC
Download Now
How to install: Follow Tutorial

The Evertek EverGlory Fastboot and ADB drivers can be downloaded below.
Evertek EverGlory ADB and Fastboot Drivers
Download Now
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Evertek EverGlory II USB Drivers
How to Install Evertek EverGlory CDC Drivers
Download the android-cdc-driver.zip file on your computer and extract it on Desktop.
Open the Device Manager on your computer by searching device manager from Windows Start Menu.
Now click on your Computer name in the Device Manager window.
Now click on Action and then select Add legacy hardware.
Add Hardware Wizard window should open, click on Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Select Show All Devices from the list and click on Next.
On the next screen, click on Have Disk… to open the Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select Android_Gadget_CDC_driver.inf file and click on Open and then on OK.
Select the Android Gadget VCOM Driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Gadget Serial, MediaTek PreLoader USB VCOM (Android), and MediaTek USB Port drivers.
Once all the listed drivers are installed, restart your computer.
How to Install Evertek EverGlory VCOM Drivers
Download and extract the android-vcom-driver.zip file on your computer.
Open Device Manager on your computer by right-clicking the Windows Start Button and selecting Device Manager.
Once the Device Manager loads, click on your Computer name.
Now click on Action and then on Add legacy hardware.
Now Add Hardware Wizard window should open. Click Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
In the next screen, select Show All Devices from the list and click on Next.
Now click on Have Disk… to launch Install From Disk window.
Click on Browse… and navigate to the folder where you have extracted the Android VCOM drivers in Step #1.
Now open Win 7 folder and select usb2ser_Win764.inf driver file if you have the 64-bit version of Windows, otherwise choose usb2ser_Win7.inf file if you have the 32-bit version of Windows. Once selected, click on Open and then on OK.
Select MediaTek DA USB VCOM Port driver from the list and click on Next.
Confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the MediaTek PreLoader USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port drivers.
Once all the listed drivers are installed, reboot your computer.
How to Install Evertek EverGlory USB Drivers Manually
Download and extract the latest_usb_driver_windows.zip to Desktop on your computer.
Open the Device Manager on your computer by searching device manager (devmgmt.msc) from Windows Start Menu.
When the Device Manager window opens, click on your Computer name.
Now click on Action and then click on Add legacy hardware.
Now Add Hardware Wizard window should open. Click on Next to continue.
Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
Now click on Show All Devices from the list and click on Next.
Now click on Have Disk… to open the Install From Disk window.
In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
Now select android_winusb.inf driver file and click on Open and then on OK.
Now select the Android ADB Interface driver from the list and click on Next.
In the next screen, confirm the Hardware driver to install and click on Next to begin the installation process.
Once installed, click on Finish.
Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Evertek EverGlory Android USB Drivers

Subscribe to Android USB Drivers

How to Install Evertek EverGlory ADB and Fastboot Drivers
Download and extract the 15 seconds ADB installer zip package on your computer.
Now right click on the adb installer setup exe file and click on Run as administrator.
Now a command prompt window should open.
It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
When it says, Do you want to install ADB system-wide? Press the Y key again and hit Enter.
Now, the ADB driver and Fastboot driver installation process should begin.
When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
Now the “Device Driver Installation Wizard” window should open.
Click on Next to install the Google USB Drivers (WinUSB).
Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install Evertek EverGlory ADB and Fastboot Drivers

Subscribe to Android USB Drivers

Important Notes:
[] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

[ad_2]